In dark, damp mine tunnels, the crisscross pipeline network functions as the “blood vessels” of a mine. Gas drainage, water & air supply, mine water discharge and fire suppression all put stringent demands on the sealing performance, corrosion resistance and safety of these pipelines. Leakage at flange joints or peeling coating on pipe bodies can trigger pipe corrosion at best, and water/gas escape that leads to severe safety accidents at worst. For a long time, however, the domestic industry for anti-corrosion coating of mine flanged steel pipes has lacked automation and professional process control, creating persistent challenges for safe mine production.
![]()
![]()
![]()
Drawing on over 20 years of expertise in pipeline anti-corrosion equipment manufacturing, Qingdao Huashida Machinery Co., Ltd. has developed and launched a new intelligent plastic-coating anti-corrosion production line for mine flanged steel pipes. With an integrated, high-precision and traceable complete process solution, it injects new technical momentum into the manufacturing of mine flanged steel pipes and fundamentally resolves long-standing anti-corrosion pain points for mine piping.
To fully appreciate the value of this new intelligent production line, we first need to examine the inherent flaws of conventional processes. Industry surveys show that most traditional production lines for mine flanged steel pipes in China still adopt segmented, rough processing modes with low process integration and poor automated precision. The problems mainly fall into three categories.
First: Leakage. Conventional equipment mostly relies on simple fluidized bed coating and manual assisted spraying. This results in uneven coating thickness, frequent defects such as pinholes, coating lumps and bare steel areas. More critically, flange end-face machining and plastic coating are separated operations, which easily causes coating overflow or partial missing coating, leaving the sealing surface out of flatness tolerance. In underground environments with high-pressure gas and highly mineralized acid-alkali water, such pipes are prone to water and gas seepage, forming frequent hidden dangers for mine safety.
Second: Inconsistent Quality. Manual shot blasting and pickling pretreatment fail to deliver uniform surface roughness and cleanliness for steel pipes, leading to unstable coating adhesion. After long-term service under pressure and flow scouring, coatings commonly blister, bulge and delaminate. In addition, all process parameters are manually adjusted, so temperature, spraying and curing settings cannot be standardized and locked. The flame-retardant and anti-static properties of finished pipes fluctuate widely, making it hard to consistently meet MT/T 181 General Technical Conditions for Plastic Pipes and Fittings for Coal Mines. This creates major obstacles for coal safety MA certification and project acceptance.
Third: Disordered Workflow. The whole production depends on manual loading, pipe flipping and touch-up coating, resulting in low efficiency and limited yield. Without closed-loop powder recovery systems and inline inspection units, dust pollution is severe. Pipe defects can only be sampled after production, and production data cannot be traced. Moreover, a large number of field joints are required during underground installation, multiplying leakage risks — this clearly fails to satisfy today’s strict mine safety supervision and traceability requirements.
Huashida’s R&D team directly targets these industry bottlenecks, focusing on three core priorities: reliable flange sealing, stable flame-retardant & anti-static performance, and standardized production. The team completely abandons segmented rough workflows and builds a fully closed-loop intelligent production system.
This new production line for plastic-coated flanged steel pipes integrates five core processes: enclosed environmental pretreatment, intelligent induction preheating, synchronous electrostatic coating on pipe inner/outer walls plus flange end faces, and constant-temperature closed-loop curing. It enables one-time clamping and positioning of flanged steel pipes and continuous end-to-end processing. Precise program control eliminates invalid coating on critical flange sealing zones, removing the root cause of sealing failure and tackling the pervasive leakage issue plaguing the sector.
Meanwhile, the system is preloaded with dedicated temperature curves for mine-grade flame-retardant epoxy and modified PE dual anti-static coatings. It automatically regulates heating, holding and curing cycles throughout the process, delivering denser, more uniform coating flow and thickness, and cutting defect rates from the source.
Flexible operation is another highlight. Breaking the specification limits of traditional lines, Huashida’s new line stably processes 3 m, 4 m and 6 m mining pipes. It is compatible with straight-seam, spiral and seamless base pipes, and supports rapid switching between different diameters and coating formulas, catering both mass production and small-batch custom orders. The matched negative-pressure closed-loop powder recovery system and curing oven waste heat recovery device greatly reduce raw material consumption and energy use. Full explosion-proof electrical configuration fully complies with production specifications for special mine-use coatings.
Process and equipment upgrades ultimately translate into verifiable pipe quality. Steel-plastic composite bonding strength of the coated pipes produced by this new line remains stable and excellent, resisting erosion from acidic and high-salinity mine water. The smooth inner bore lowers fluid resistance and prevents scaling and clogging over long service life. CNC precision turning on flange end faces greatly improves flatness and coaxiality, delivering outstanding airtightness and sealing performance under high pressure.
A transformative upgrade is the inspection logic. Unlike traditional post-process sampling, the new line is equipped with inline film thickness monitoring, spark pinhole holiday testing and full-process data acquisition systems. All parameters and inspection data are automatically archived from base pipe pretreatment to finished product delivery, achieving full traceability. Every pipe carries a complete “quality file”, guaranteeing consistent batch quality and supplying complete data support for mine project acceptance, safety supervision and quality accountability.
Benefiting from reliable sealing and stable flame-retardant & anti-static performance, pipes manufactured by this line fit a wide range of high-risk fluid conveying scenarios in mines. For core coal mine safety applications, they are the preferred piping for gas drainage networks. Superior airtightness and anti-static performance mitigate major risks such as gas leakage and static ignition. They are also widely used in underground water supply & drainage, fire stabilizing pressure pipelines, grouting lines and ventilation systems. Applications can be further extended to backfill transport, tailings water treatment in metallic and non-metallic mines, as well as tunnel engineering, explosion-proof water supply and drainage in chemical parks and other industrial sites with stringent safety requirements.
The technical iteration of a single flanged steel pipe plastic-coating line may look like a small breakthrough in anti-corrosion equipment manufacturing, yet it underpins the big picture of mine safety. When every weld, coating layer and flange sealing surface in manufacturing can be precisely controlled and fully recorded, those crisscrossing “blood vessels” deep underground gain solid quality assurance. Driven by anti-corrosion equipment innovation to lift product quality, and filling process gaps with domestic high-end technology, Huashida’s new plastic-coating line for flanged steel pipes marks a solid innovative step for China’s mining equipment industry toward safe, green and high-quality development.